HIGH SPEED CENTERS (FOR CNC)
#Capable of withstanding very high rpm at high loads.
#Capable of withstanding very high rpm at high loads.
#Suitable for CNC and other high speed turning centers.
#Bearing used are of FAG GERMANY make.
#Copy Turning centers are not recommeded and should be used only for medium speed and very low load applications.
 |
MODEL
|
AVAILABLE IN TAPER SIZES
|
| EXTRA LIGHT DUTY | MT-1, 2 & 3 |
| (Double Bearing) | (Plain Point only) |
| STANDARD | MT-1, 2, 3, 4, 5 & 6 |
| (Heavy Duty Triple Bearing) | (Plain, Carbide Tipped, Female, Extended, HSS Tipped Points) |
| EXTRA HEAVY DUTY | MT-3, 4, 5 & 6 |
| (Four Bearings) | (Plain, Carbide Tipped and Extended Points) |
| SUPER EXTRA HEAVY DUTY | MT-4, 5, 6 & 7 |
| (Four & Five Bearings) | (Plain & Carbide Tipped Points) |
| JUMBO HEAVY DUTY | MT-5 & 6 |
| (Plain Point only) |
- Application : For Conventional Slow Speed Lathes
- All Centers are sealed for entry of coolant and swarf / chips by special sealing arrangement.
- Each center provided with an inspection report covering all critical parameters like run out, correctness of Morse Taper angle etc.
- Precision Ground. Maximum radial run out within 0.015mm. Closer run outs can also be provided against request.